Sliding Patio Doors Repair
Sliding patio doors are an excellent way to take advantage of your outdoor space, however they can be difficult to open and close. This can be caused by various issues like dirty tracks or a misaligned slider.
Clean the track and lubricating the rollers. You can also utilize the adjustment holes on the bottom of the panel to re-align your rollers.
Tracks that are damaged or dirty
A damaged or dirty track can cause the sliding door to not slide properly. Over time, dirt, grit, and even rust could build up and block the track from being able to move smoothly. The solution is to thoroughly clean using an abrasive and mild detergent. This process should be carried out regularly to ensure smooth operation and to make sure that costly repairs are not required in the future.
A leaking door is another common issue that requires prompt attention to avoid mold growth, water damage and structural degradation. The most common cause is worn weather stripping and doors that are not aligned properly, which can be fixed by replacing the weather stripping and by aligning the door.
Another issue that can be fixed with a little DIY work is rollers that jump off their tracks. This task can be difficult so you may need a helper to help you. To reposition the rollers to the right position, sit inside the house and lean one of the panels towards you. After lifting the panel off the bottom track, you'll need place it on sawhorses in order to stop it from falling off. Then loosen the screws that hold each roller in place, and pry them out with the help of a screwdriver. You can now clean any dirt that's stuck between the wheel and the tracks. Then, clean each wheel using denatured alcohol as well as an rag, and then reposition the wheels and reattach them to their tracks.
If a section of the track is bent, it might be possible to straighten it using a rubber mallet and block of wood. If the bent section is near hinges or has the potential to cause further damage, it's recommended to call in a professional.
Misaligned Rollers
If your sliding door isn't sliding as smoothly, it's likely because the roller wheels aren't aligned with the track. The wheels could be dirty or rusted, and their bearings wear down. This causes friction between the bottom of the door and the track, causing it to grind or snag when it's shut or opened. This can also trigger noises that squeak.
This is a straightforward fix. The wheels are mounted on the bracket, which can be adjusted, which means you don't need to take off the door. Use a screwdriver to find the holes for adjustment on the frame (usually either side). Turn the screws to control the wheels. A clockwise rotation of the screw raises the wheel, while a counterclockwise turn lowers it. Continue adjusting the door until it opens and closes effortlessly.
It's important to adjust the wheels prior to adjusting the latch. The latch hooks must align with the strike plate (the opening into which the latch locks) to allow the lock to work properly. If you don't do this the latch could accidentally open or shut when you're out of the room.
The sliding patio doors are an investment. Maintaining them in good condition will ensure the safety of your family. You can avoid costly repairs by addressing the most common issues, such as broken tracks, rollers, and handles. Contact us for more information on patio doors. We can evaluate your sliding patio door repair needs and help you keep it in good shape. Our experts can also help with any replacement parts that you may need.
Damaged or loosely hung door frame
Sliding patio doors are a wonderful addition to any home and offer a stylish and practical alternative to hinged or swing-open doors for patios. Like other hardware items sliding patio doors may be prone to problems with time. A lot of these issues are fixable by using a bit of DIY expertise.
A common issue with sliding patio doors is gaps in the frame. This could be due to many factors, including tracks or rollers that are not aligned properly as well as a damaged or damaged door track or a bent frame. In the majority of instances, the issue is easily solved by taking the doors off and reattaching the track. It is essential to be very careful not to damage the frame or track.
In some instances, it might be necessary for the entire track to be replaced. This can be done easily using the universal kit that is readily available at major hardware stores. These kits are simple to install and will have your door working perfectly in no time.
Check your sliding door's hardware and frame for signs of wear, for example loose bolts or screws. These are usually tightened with a screwdriver, or wrench and is a simple and efficient DIY patio door maintenance procedure. Additionally, it is important to lubricate your rollers and tracks to ensure smooth operation and to prevent premature wear.
For many homeowners, their patio doors are their primary entrance to their backyard and outdoor living space. They need to to function correctly to ensure the safety of their home and provide security. By taking the time to follow these simple DIY maintenance steps, homeowners can prolong the life of their sliding patio doors and reduce costly repairs or replacements.
A faulty handle
The sliding patio doors are a great way to enter your home and gain access to your backyard, but they can become difficult to operate if they are misaligned. A faulty handle can also cause the door to become stuck or difficult to open and close. The good news is that repairing the handle that is loose is a fairly simple job that can be accomplished at home.
In many cases, a handle that is loose is the result of screws that have worked through the backplate. To fix this issue just tighten the two screws on the inside of the handle with a screwdriver. If you notice that the handle remains loose, it may be an indication that the threads are worn and will need to be replaced.
A damaged latch could be the reason. It is more likely to occur if the latch is made of plastic, rather than metal. If the latch is not turning or catching it, try oiling it first to see if this helps. If not, you may need to replace the lock entirely.
Finally, the handle itself may become difficult to operate in the event that it is broken or cracked. If this happens, you will need to replace the handle with one that matches the style and style of your patio doors.
Feldco can help restore your patio doors back to their former splendor, no matter if they are brand new or old and outdated. We have high-quality doors available in various sizes and styles that can be adapted to match your home perfectly. Contact us today to learn more about our doors! We are proud to serve homeowners in Southern California, including Ventura County, Orange County & San Diego County.
Afflicted Weatherstripping
If you're seeing light in windows and doors that are closed, or you feel a draft pulling on the door or window, it's time to replace your weather stripping. The strips form a tight seal that prevents air, pests, and water from entering your home. It also keeps your heated and conditioned air inside, thereby saving energy costs all year round.
It may have lost its strong, bouncy seal due to age. patio door repairs near me is easy to diagnose by taking a dollar note and putting it through the seal between the top of the door frame as well as the below the jamb of the door where they overlap. If the dollar bill slides easily between the seal and the door easily then it's time to replace the weatherstripping.
It's tempting to remove only the worn portion of weather stripping and then replace it, but this could result in cracks on the sides of the new stripping and could cause issues with the seal in the future. It is more efficient to replace the entire stripping. This will allow you to rest assured that your door will be sealed properly.
For an easy DIY project take a look at our guide on weather stripping to take off the old weather stripping. Then, you can apply the right material to your sliding patio door and frame to create a durable, tight seal. It's a great method to repair your door and save on your energy bill and you shouldn't wait until it's too late. You'll be able to save money and improve the appearance of your home.